Single Facer

Vacuum single facer 320model is the main machine for producing the corrugated paperboard.

Characteristics

* Paper leading with Vacuum absorb model, have high-pressure & strong fan motor. The flow of fan can be adjusted, and have silencer; The electric control system fastens on a electrical case, which has min. 1.5meter distance from equipments, the operation side is completely independent.

* Gimble drive system, separated structure and independent drive case. Closed gear drive system with oiling lubrication, the usage life of the gears is highly prolonged.

* Machine base and wallboard is cast iron structure, thickness of the wallboard is 180mm.

* Corrugated Roll: Material of corrugated roll is 52CrMo alloy, which is dealt with quench, surface polish. Diameter of roll is Ø 320mm, surface hardness is more than HRC60. The adjust of up and down of roll is pneumatic controlled.

* Press roll: Diameter is Ø320mm, surface is worn down and chromeplated. The adjust of up and down of roll is pneumatic controlled, material is Carbon Iron 45#, dealt with confection.

* Pre-heater Roll: Diameter is Ø400mm, surface is worn down and chromeplated. All are connect with soft metal pipe.

* The bearing of corrugated roll and press roll are lubricated and high-temperature resistant.

* Glue supply and quit is pneumatic controlled, diameter of glue roll is Ø240mm, surface of roll has concave netted rind, surface polish & chromeplated. Surface of adjust roll is surface polish & chromeplated.

* Use electrical glue separate equipments, the glue part can run independently when the main motor stops, this can avoid the dry of the glue.(Choose by customer.)

* Middle height of corrugated roll is 0.10mm, middle height of press roll is 0.075mm. Have place limit equipment, diameter of tighten cylinder is Ø160mm.

 Technological Parameters:

1. Working width: 1300-2200mm

2. Design speed: 120m/min. 

3. Operation direction: Left or right (design as customer’s workshop.)

4. Steam pressure: 0.8-1.2Mpa.

5. Flute: UV or UVV model, can design as customer’s requirement.

 Diameter of the rolls:

1. Corrugated Roll: Ø320 mm

2. Press Roll: Ø320 mm

3. Gluing Roll: Ø219 mm

4. Pre-heating Roll: Ø400-600 mm

 Drive Power:

1) Main Motor: 7.5KW, 380V, 50HZ

2) Fax Motor: 5.5KW, 380V, 50HZ

Main outsourcing parts, materials and origin

Name	Brand & Origin	Material
Wallboard and basement	Own factory	HT200
Wheel box		HT200
Revolving joint & metal soft pipe	Shandong Luguangqiu
Main motor	Jiangsu Deyi	11KW speed adjust motor
Bearing	Shenzhen HWL
Sealmaster	Anhui Qianshan, Wanshan brand
High-pressure Fan motor	Own city
Cylinder	Own city
Electromagnetism valve	Tian Ao
Drain Valve	Beijing
Electrical elements	Delixi
	Tian Ao

Easy broken parts and Spare parts List

Name	Brand or Origin	QTY
Vacuum sheet copper	Own Area	2 sets
Paper-moveable sheet of press roll	Own Area	2 sets
Gluing board	Own Area	2 sets
High-temperature-anti lubricate grease	Great Wall Brand	1 drum
Metal soft pipe	Shangdong Lu Guangqiu	Thick and thin 1set each
Valve	Shandong

                                                                                     

Single Facer