Vacuum Absorb Single Facer

Adsorption type single facer. Can be chain driving or cardan driving.

Characteristics:

 1: Paper feading with Vacuum absorb model, have high-pressure & strong fan motor. The flow of fan can be adjusted, and have silencer; The electric control system fastens on a electrical case, which has min. 1.5meter distance from equipments, the operation side is completely independent.

2: Gimble drive system, separated structure and independent drive case. Closed gear drive system with oiling lubrication, the usage life of the gears is highly prolonged.

3:Machine base and wallboard is cast iron structure, thickness of the wallboard is 130mm.

4: Corrugated Roll: Material of corrugated roll is 52CrMo alloy, which is dealt with quench, surface polish. Diameter of roll is Ø 270mm, surface hardness ismore than HRC60. The adjust of up and down of roll is pneumatic controlled.

5: Press roll: Diameter is Ø270mm, surface is worn down and chromeplated. The adjust of up and down of roll is pneumatic controlled, material is Carbon Iron 45#, dealt with confection.

6:Pre-heater Roll: Diameter is Ø215mm, surface is worn down and chromeplated. All are connect with soft metal pipe.

7:The bearing of corrugated roll and press roll are lubricated and high-temperature resistant.

8: Glue supply and quit is pneumatic controlled, diameter of glue roll is Ø215mm, surface of roll has concave netted rind, surface polish & chromeplated. Surface of adjust roll is surface polish & chromeplated.

9: Middle height of corrugated roll is 0.10mm, middle height of press roll is 0.075mm. Have place limit equipment, diameter of tighten cylinder is Ø160mm.

  Technological Parameters:

1. Working width: 1600mm

2. Design speed: 100m/min. Economic speed: 80m/min.

3. Operation direction: Left or right (design as customer’s workshop.)

4. Gas: 0.4-0.9Mpa.

5. Steam pressure: 0.8-1.3Mpa.

6. Flute: UV or UVV model, can design as customer’s requirement.

    Diameter of the rolls:

1. Corrugated Roll: Ø270 mm

2. Press Roll: Ø270 mm

3. Gluing Roll: Ø215 mm

4. Pre-heating Roll: Ø215 mm

5.Universal joint driving.  

 Drive Power

1) Main Motor: 7.5KW, 380V, 50HZ

2) Fan Motor: 11KW, 380V, 50HZ

Vacuum Absorb Single Facer